Richter | Metritools
Tank dipping tapes and accessories for oil gauging
Tension
The tension force of the tape is in accordance with the weight of the dip weight, please indicate the chosen dip weight at any request, tank dipping tapes and dip weights are sold separately.
Unwinding the tape
2 tape output options are available: Type "G" is the standard manufacturing style, if you wish Type "F", please specify it when requesting.
Type "G" tape rolls out near the handle.
Type "F" tape rolls out through the guide.
Accuracy according CE Standard
Class II accuracy is the standard manufacturing type, Class I accuracy is available as an option (on request).
CE accuracy table Classe I
Maximum tolerance ± over the entire Richter range manufactured under the CE Class I accuracy.
Formula: (a=0,1 mm; b=0,1 mm; L in meters)
| m | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 |
| 0 | 1,1 | 2,1 | 3,1 | 4,1 | 5,1 | 6,1 | 7,1 | 8,1 | 9,1 | 10,1 | |
| 1 | 0,2 | 1,2 | 2,2 | 3,2 | 4,2 | 5,2 | 6,2 | 7,2 | 8,2 | 9,2 | |
| 2 | 0,3 | 1,3 | 2,3 | 3,3 | 4,3 | 5,3 | 6,3 | 7,3 | 8,3 | 9,3 | |
| 3 | 0,4 | 1,4 | 2,4 | 3,4 | 4,4 | 5,4 | 6,4 | 7,4 | 8,4 | 9,4 | |
| 4 | 0,5 | 1,5 | 2,5 | 3,5 | 4,5 | 5,5 | 6,5 | 7,5 | 8,5 | 9,5 | |
| 5 | 0,6 | 1,6 | 2,6 | 3,6 | 4,6 | 5,6 | 6,6 | 7,6 | 8,6 | 9,6 | |
| 6 | 0,7 | 1,7 | 2,7 | 3,7 | 4,7 | 5,7 | 6,7 | 7,7 | 8,7 | 9,7 | |
| 7 | 0,8 | 1,8 | 2,8 | 3,8 | 4,8 | 5,8 | 6,8 | 7,8 | 8,8 | 9,8 | |
| 8 | 0,9 | 1,9 | 2,9 | 3,9 | 4,9 | 5,9 | 6,9 | 7,9 | 8,9 | 9,9 | |
| 9 | 1,0 | 2,0 | 3,0 | 4,0 | 5,0 | 6,0 | 7,0 | 8,0 | 9,0 | 10,0 |
CE accuracy table Classe II
Maximum tolerance ± over the entire Richter range manufactured under the CE Class II accuracy.
Formula: a+bL (a=0,3 mm; b=0,2 mm; L in meters)
| m | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 |
| 0 | 2,3 | 4,3 | 6,3 | 8,3 | 10,3 | 12,3 | 14,3 | 16,3 | 18,3 | 20,3 | |
| 1 | 0,5 | 2,5 | 4,5 | 6,5 | 8,5 | 10,5 | 12,5 | 14,5 | 16,5 | 18,5 | |
| 2 | 0,7 | 2,7 | 4,7 | 6,7 | 8,7 | 10,7 | 12,7 | 14,7 | 16,7 | 18,7 | |
| 3 | 0,9 | 2,9 | 4,9 | 6,9 | 8,9 | 10,9 | 12,9 | 14,9 | 16,9 | 18,9 | |
| 4 | 1,1 | 3,1 | 5,1 | 7,1 | 9,1 | 11,1 | 13,1 | 15,1 | 17,1 | 19,1 | |
| 5 | 1,3 | 3,3 | 5,3 | 7,3 | 9,3 | 11,3 | 13,3 | 15,3 | 17,3 | 19,3 | |
| 6 | 1,5 | 3,5 | 5,5 | 7,5 | 9,5 | 11,5 | 13,5 | 15,5 | 17,5 | 19,5 | |
| 7 | 1,7 | 3,7 | 5,7 | 7,7 | 9,7 | 11,7 | 13,7 | 15,7 | 17,7 | 19,7 | |
| 8 | 1,9 | 3,9 | 5,9 | 7,9 | 9,9 | 11,9 | 13,9 | 15,9 | 17,9 | 19,9 | |
| 9 | 2,1 | 4,1 | 6,1 | 8,1 | 10,1 | 12,1 | 14,1 | 16,1 | 18,1 | 20,1 |
Dip Weights are available on the "Weights" tab
Tank Dipping Tapes of Carbon Steel
Brass frame
Tape width 13 mm
Tape thickness 0,20 mm
Carbon steel tape, solid brass frame, oblique handle in lacquered hardwood, brass arm that prevents the tape from unwinding when not in use, winding drum of metal.
| Part # | Front side | Reverse side |
|---|---|---|
| 414-MS | mm | - |
| 415-MS | mm | feet, 1/16" inch |
| 415-MS | mm | feet, 1/10" inch |
| 415-MS | mm | feet, 10ths, 100ths |
Tank Dipping Tapes of Carbon Steel
Aluminium frame
Tape width 13 mm
Tape thickness 0,20 mm
Carbon steel tape, aluminium frame, oblique plastic handle, anodized metal arm that prevents the tape from unwinding when not in use, winding drum of durable plastic.
| Part # | Front side | Reverse side |
|---|---|---|
| 414-ES | mm | - |
| 415-ES | mm | feet, 1/16" inch |
| 415-ES | mm | feet, 1/10" inch |
| 415-ES | mm | feet, 10ths, 100ths |
Lengths
Lengths are available in meters or feet, please indicate the required length at any request.
- 10 meters / 33 feet
- 15 meters / 50 feet
- 20 meters / 66 feet
- 25 meters / 82 feet
- 30 meters / 100 feet
- 50 meters / 165 feet
Graduation
Raised markings and figures in bright natural steel colour on a dark etched background, please indicate the required graduation at any request.
| Graduation | Front side or reverse side |
|---|---|
| mm |  |
| feet, 1/16 inch |  |
| feet, 1/10 inch |  |
| feet, 10ths, 100ths |  |
Dip Weights are available on the "Weights" tab
Tank Dipping Tapes of Stainless Steel
Brass frame
Tape width 13 mm
Tape thickness 0,20 mm
Stainless steel tape, solid brass frame, oblique handle in lacquered hardwood, brass arm that prevents the tape from unwinding when not in use, winding drum of metal.
| Part # | Front side | Reverse side |
|---|---|---|
| 464-MS | mm | - |
| 465-MS | mm | feet, 1/16" inch |
| 465-MS | mm | feet, 1/10" inch |
| 465-MS | mm | feet, 10ths, 100ths |
Tank Dipping Tapes of Stainless Steel
Aluminium frame
Tape width 13 mm
Tape thickness 0,20 mm
Stainless steel tape, aluminium frame, oblique plastic handle, anodized metal arm that prevents the tape from unwinding when not in use, winding drum of durable plastic.
| Part # | Front side | Reverse side |
|---|---|---|
| 464-ES | mm | - |
| 465-ES | mm | feet, 1/16" inch |
| 465-ES | mm | feet, 1/10" inch |
| 465-ES | mm | feet, 10ths, 100ths |
Lengths
Lengths are available in meters or feet, please indicate the required length at any request.
- 10 meters / 33 feet
- 15 meters / 50 feet
- 20 meters / 66 feet
- 25 meters / 82 feet
- 30 meters / 100 feet
- 50 meters / 165 feet
Graduation
Raised markings and figures in bright natural steel colour on a dark etched background, please indicate the required graduation at any request.
| Graduation | Front side or reverse side |
|---|---|
| mm | |
| feet, 1/16 inch | |
| feet, 1/10 inch | |
| feet, 10ths, 100ths | |
Dip Weights are available on the "Weights" tab
Tank Dipping Tapes of White Steel
Brass frame
Tape width 13 mm
Tape thickness 0,20 mm
White steel tape, solid brass frame, oblique handle in lacquered hardwood, brass arm that prevents the tape from unwinding when not in use, winding drum of metal.
| Part # | Front side | Reverse side |
|---|---|---|
| 414W-MS | mm | - |
| 415W-MS | mm | feet, 1/16" inch |
| 415W-MS | mm | feet, 1/10" inch |
| 415W-MS | mm | feet, 10ths, 100ths |
Tank Dipping Tapes of White Steel
Aluminium frame
Tape width 13 mm
Tape thickness 0,20 mm
White steel tape, aluminium frame, oblique plastic handle, anodized metal arm that prevents the tape from unwinding when not in use, winding drum of durable plastic.
| Part # | Front side | Reverse side |
|---|---|---|
| 414W-ES | mm | - |
| 415W-ES | mm | feet, 1/16" inch |
| 415W-ES | mm | feet, 1/10" inch |
| 415W-ES | mm | feet, 10ths, 100ths |
Lengths
Lengths are available in meters or feet, please indicate the required length at any request.
- 10 meters / 33 feet
- 15 meters / 50 feet
- 20 meters / 66 feet
- 25 meters / 82 feet
- 30 meters / 100 feet
- 50 meters / 165 feet
Graduation
Black graduation, black and red figures on a white background protected by a lacquered clear lacquer, please indicate the required graduation at any request.
| Graduation | Front side or reverse side |
|---|---|
| mm |  |
| feet, 1/16 inch |  |
| feet, 1/10 inch |  |
| feet, 10ths, 100ths |  |
Dip Weights for Tank Dipping Tapes
Brass or Stainless Steel
Brass
Part #: Type "A"
➯ Brass weight
➯ Length: 100 mm
➯ Diameter: 45 mm
➯ Weight: 625 g
➯ Riveted to the tape
➯ Graduated one side only
➯ Cylindrical with flat bottom
➯ Approved for verification
N.B.: Fits to the whole Richter range
Brass
Part #: Type "B"
➯ Brass weight
➯ Length: 156 mm
➯ Diameter: 30 mm
➯ Weight: 675 g
➯ Attached by a swivel hook
➯ Graduated one or both sides
➯ Torpedo Pattern
➯ Not approved for verification
N.B.: Fits to the whole Richter range
Brass
Part #: Type "C"
➯ Brass weight
➯ Length: 70 mm
➯ Diameter: 20 mm
➯ Weight: 200 g
➯ Attached to clasp by rivet
➯ Graduated one or both sides
➯ Cylindrical with flat bottom
➯ Approved for verification
N.B.: Fits to the whole Richter range
Brass
Part #: Type "D"
➯ Brass weight
➯ Length: 171 mm
➯ Diameter: 22 mm
➯ Weight: 400 g
➯ Attached by a swivel hook
➯ Graduated one or both sides
➯ Cylindrical with tip
➯ Not approved for verification
N.B.: Fits to the whole Richter range
Brass
Part #: Type "E"
➯ Brass weight
➯ Length: 103 mm
➯ Diameter: 25 mm
➯ Weight: 400 g
➯ Attached to the tape by a screw
➯ Graduated one or both sides
➯ Cylindrical with flat bottom
➯ Approved for verification
N.B.: Fits to the whole Richter range
Brass
Part #: Type "F"
➯ Brass weight
➯ Length: 100 mm
➯ Diameter: 45 mm
➯ Weight: 1000 g
➯ Attached to the tape by a screw
➯ Graduated one side only
➯ Cylindrical with tip
➯ Approved for verification
N.B.: Fits to the whole Richter range
Brass
Part #: Type "G"
➯ Brass weight
➯ Length: 171 mm
➯ Diameter: 25 mm
➯ Weight: 500 g
➯ Attached by a swivel hook
➯ Graduated one or both sides
➯ Cylindrical with tip
➯ Not approved for verification
N.B.: Fits to the whole Richter range
Brass
Part #: Type "H"
➯ Brass weight
➯ Length: 150 mm
➯ Diameter: 30 mm
➯ Weight: 700 g
➯ Attached to the tape by a screw
➯ Graduated one or both sides
➯ Cylindrical, both ends bevelled
➯ Approved for verification
N.B.: Fits to the whole Richter range
Stainless Steel
Part #: Type "I"
➯ Stainless steel weight
➯ Length: 103 mm
➯ Diameter: 25 mm
➯ Weight: 400 g
➯ Attached to the tape by a screw
➯ Graduated one or both sides
➯ Cylindrical with flat bottom
➯ Approved for verification
N.B.: Fits to the whole Richter range
Brass
Part #: Type "K"
➯ Brass weight
➯ Length: 150 mm
➯ Diameter: 25 mm
➯ Weight: 500 g
➯ Attached to the tape by a screw
➯ Graduated one or both sides
➯ Cylindrical with tip
➯ Approved for verification
N.B.: Fits to the whole Richter range
Brass
Part #: Type "L"
➯ Brass weight
➯ Length: 121 mm
➯ Diameter: 25 mm
➯ Weight: 400 g
➯ Attached by a swivel hook
➯ Graduated one or both sides
➯ Cylindrical with tip
➯ Not approved for verification
N.B.: Fits to the whole Richter range
Brass
Part #: Type "P"
➯ Brass weight
➯ Length: 103 mm
➯ Diameter: 25 mm
➯ Weight: 400 g
➯ Attached to the tape by a screw
➯ Graduated one side only
➯ Cylindrical with tip
➯ Approved for verification
N.B.: Fits to the whole Richter range
Stainless Steel
Part #: Type "T"
➯ Stainless steel weight
➯ Length: 100 mm
➯ Diameter: 45 mm
➯ Weight: 1000 g
➯ Attached to the tape by a screw
➯ Graduated one side only
➯ Cylindrical with tip
➯ Approved for verification
N.B.: Fits to the whole Richter range
Stainless Steel
Part #: Type "U"
➯ Stainless steel weight
➯ Length: 121 mm
➯ Diameter: 25 mm
➯ Weight: 400 g
➯ Attached by a swivel hook
➯ Graduated one side only
➯ Cylindrical with flat bottom
➯ Not approved for verification
N.B.: Fits to the whole Richter range
Brass
Part #: Type "W"
➯ Brass weight
➯ Length: 156 mm
➯ Diameter: 45 mm
➯ Weight: 1500 g
➯ Attached by a swivel hook
➯ Graduated one or both sides
➯ Torpedo pattern
➯ Not approved for verification
N.B.: Fits to the whole Richter range
Stainless Steel
Part #: Type "X"
➯ Stainless steel weight
➯ Length: 103 mm
➯ Diameter: 35 mm
➯ Weight: 700 g
➯ Attached to the tape by a screw
➯ Graduated one side only
➯ Cylindrical with flat bottom
➯ Approved for verification
N.B.: Fits to the whole Richter range
Stainless Steel
Part #: Type "Y"
➯ Stainless steel weight
➯ Length: 150 mm
➯ Diameter: 30 mm
➯ Weight: 700 g
➯ Attached to the tape by a screw
➯ Graduated one or both sides
➯ Cylindrical ends bevelled
➯ Approved for verification
N.B.: Fits to the whole Richter range
Brass or Stainless Steel
Part #: Type "S034"
Brass weight
Part #: Type "S034R"
Stainless steel weight
➯ Brass or Stainless steel weight
➯ Length: 246 mm
➯ Diameter: 30 mm
➯ Weight: 1200 g
➯ Attached by a pressing push button
➯ Graduated one side only
➯ Cylindrical, flat tip
➯ Approved for verification
N.B.: Fits to the whole Richter range
Brass
Part #: Type "S059-0"
No graduation
Part #: Type "S059-1"
mm graduation
Part #: Type "S059-2"
mm graduation + inches 1/16"
➯ Brass weight
➯ Length: 91 mm
➯ Diameter: 25 mm
➯ Weight: 300 g
N.B.: Fits to the whole Richter range
Stainless Steel
Part #: Type "S059R-0"
No graduation
Part #: Type "S059R-1"
mm graduation
Part #: Type "S059R-2"
mm graduation + inches 1/16"
➯ Stainless steel weight
➯ Length: 91 mm
➯ Diameter: 25 mm
➯ Weight: 300 g
N.B.: Fits to the whole Richter range
Tank Dipping Tapes according to IPM Specification
Institute of Petroleum Measurement
International Standard ISO/FDIS 451
Accuracy: under a tension of 15 N and a reference temperature of 20°C (68°F), +/-1,5 mm for each 30 m or +/- 0,06 inch for each 100 ft length.
Features: strong brass frame with winding drum of metal and oblique wooden handle, tape rolls out near the handle, grounding of frame at extra cost.
Furnished with a brass hook with locking screw is attached to the tape to keep the weight secure, hook of stainless steel at extra cost.
IPM Dip Weights are available on this page
IPM - Tank Dipping Tapes of Carbon Steel
Tape width 13 mm
Tape thickness 0,25 mm
IPM - Carbon Steel Tape
| Part # | Graduation |
|---|---|
| 414MS/IPM8 | mm |
| 414MS/IPM7A | feet, inches, 1/10" inch |
| 414MS/IPM7B | feet, inches, 1/16" inch |
IPM - Tank Dipping Tapes of Stainless Steel
Tape width 13 mm
Tape thickness 0,20 mm
IPM - Stainless Steel Tape
| Part # | Graduation |
|---|---|
| 464MS/IPM8 | mm |
| 464MS/IPM7A | feet, inches, 1/10" inch |
| 464MS/IPM7B | feet, inches, 1/16" inch |
IPM - Dip Weights
Brass
Range according to the IPM Specification
Made in GermanyPart #: Type "B-m"
mm graduation
Part #: Type "B-z"
inch graduation
➯ Brass weight
➯ Length: 152,4 mm (6")
➯ Torpedo Pattern
➯ Diameter: 30 mm (1 1/4")
➯ Weight: 675 g (1.5 Lbs)
➯ IPM compliant
N.B.: Fits to the Richter's IPM range, IPM8, IPM7-A, IPM7-B
Brass
Range according to the IPM Specification
Made in GermanyPart #: Type "W-m"
mm graduation
Part #: Type "W-z"
inch graduation
➯ Brass weight
➯ Length: 152,4 mm (6")
➯ Torpedo Pattern
➯ Diameter: 45 mm (1 3/4")
➯ Weight: 1500 g (3.5 Lbs)
➯ IPM compliant
N.B.: Fits to the Richter's IPM range, IPM8, IPM7-A, IPM7-B
Lengths
Lengths are available in meters or feet, please indicate the required length at any request.
- 10 meters / 33 feet
- 15 meters / 50 feet
- 20 meters / 66 feet
- 25 meters / 82 feet
- 30 meters / 100 feet
- 50 meters / 165 feet
Graduation
Raised markings and figures in bright natural steel colour on a dark etched background, please indicate the required graduation at any request.
| Graduation | Front side |
|---|---|
| mm | |
| feet, inches, 1/10" inch | |
| feet, inches, 1/16" inch | |
Accessories and spare parts for Tank Dipping Tapes
Brass frame with grounding cable
To avoid static electricity when measuring all volatile or flammable liquids.
Part #: MSE
Grounding cable
Cable dimension 1.5 mm2, 2 m length with 2 crocodile clamps for grounding of tank dipping tapes to avoid static electricity.
Can be used for all tank dipping tapes with brass frames.
Part #: 496
Winding arm for brass frame
Before ordering this item, state length of tape.
Part #: KMS
Winding arm for aluminium frame
Before ordering this item, state length of tape.
Part #: KLM
Nickel plated swivel hook with clasp
Part #: 497
Brass hook with knurled locking nut
Part #: 498
Stainless steel hook with knurled locking nut
Part #: 499
Water indicator, tube 70 g
Part #: WP-70
Gasoline finder, tube 60 g
Part #: OP-60
Plastic case, foam rubber, 320 x 280 x 119 mm
Part #: 556
Refills, carbon steel tapes
Tapes can be replaced, refills are available
Refills, carbon steel tapes
Made in Germany
| Part #: 414-MSa | Part #: 414-ESa | Part #: 415-MSa | Part #: 415-ESa |
|---|---|---|---|
| for gauges 414-MS | for gauges 414-ES | for gauges 415-MS | for gauges 415-ES |
| mm / -Front side / - | mm / -Front side / - | mm / 1/10" inchFront side / Reverse side ∗ | mm / 1/16" inchFront side / Reverse side ∗ |
| 10 meters | 10 meters | 10 meters / 33 ft | 10 meters / 33 ft |
| 15 meters | 15 meters | 15 meters / 50 ft | 15 meters / 50 ft |
| 20 meters | 20 meters | 20 meters / 66 ft | 20 meters / 66 ft |
| 25 meters | 25 meters | 25 meters / 82 ft | 25 meters / 82 ft |
| 30 meters | 30 meters | 30 meters / 100 ft | 30 meters / 100 ft |
| 50 meters | 50 meters | 50 meters / 165 ft | 50 meters / 165 ft |
∗ Or graduated on request in 10ths ft or 100ths ft.
Refills, stainless steel tapes
Tapes can be replaced, refills are available
Refills, stainless steel tapes
Made in Germany
| Part #: 464-MSa | Part #: 464-ESa | Part #: 465-MSa | Part #: 465-ESa |
|---|---|---|---|
| for gauges 464-MS | for gauges 464-ES | for gauges 465-MS | for gauges 465-ES |
| mm / -Front side / - | mm / -Front side / - | mm / 1/10" inchFront side / Reverse side ∗ | mm / 1/16" inchFront side / Reverse side ∗ |
| 10 meters | 10 meters | 10 meters / 33 ft | 10 meters / 33 ft |
| 15 meters | 15 meters | 15 meters / 50 ft | 15 meters / 50 ft |
| 20 meters | 20 meters | 20 meters / 66 ft | 20 meters / 66 ft |
| 25 meters | 25 meters | 25 meters / 82 ft | 25 meters / 82 ft |
| 30 meters | 30 meters | 30 meters / 100 ft | 30 meters / 100 ft |
| 50 meters | 50 meters | 50 meters / 165 ft | 50 meters / 165 ft |
∗ Or graduated on request in 10ths ft or 100ths ft.
Refills, white steel tapes
Tapes can be replaced, refills are available
Refills, white steel tapes
Made in Germany
| Part #: 414W-MSa | Part #: 414W-ESa | Part #: 415W-MSa | Part #: 415W-ESa |
|---|---|---|---|
| for gauges 414W-MS | for gauges 414W-ES | for gauges 415W-MS | for gauges 415W-ES |
| mm / -Front side / - | mm / -Front side / - | mm / 1/10" inchFront side / Reverse side ∗ | mm / 1/16" inchFront side / Reverse side ∗ |
| 10 meters | 10 meters | 10 meters / 33 ft | 10 meters / 33 ft |
| 15 meters | 15 meters | 15 meters / 50 ft | 15 meters / 50 ft |
| 20 meters | 20 meters | 20 meters / 66 ft | 20 meters / 66 ft |
| 25 meters | 25 meters | 25 meters / 82 ft | 25 meters / 82 ft |
| 30 meters | 30 meters | 30 meters / 100 ft | 30 meters / 100 ft |
| 50 meters | 50 meters | 50 meters / 165 ft | 50 meters / 165 ft |
∗ Or graduated on request in 10ths ft or 100ths ft.
Refills, IPM carbon steel tapes
Tapes can be replaced, refills are available
Refills, IPM carbon steel tapes
Made in Germany
| Part #: 414MSa/IPM8 | Part #: 414MSa/IPM7A | Part #: 414MSa/IPM7B |
|---|---|---|
| for gauges 414MS/IPM8 | for gauges 414MS/IPM7A | for gauges 414MS/IPM7B |
| mm / -Front side / - | mm / 1/10" inchFront side / Reverse side | mm / 1/16" inchFront side / Reverse side |
| 10 meters | 10 meters / 33 ft | 10 meters / 33 ft |
| 15 meters | 15 meters / 50 ft | 15 metros / 50 ft |
| 20 meters | 20 meters / 66 ft | 20 meters / 66 ft |
| 25 meters | 25 meters / 82 ft | 25 meters / 82 ft |
| 30 meters | 30 meters / 100 ft | 30 meters / 100 ft |
| 50 meters | 50 meters / 165 ft | 50 meters / 165 ft |
Refills, IPM stainless steel tapes
Tapes can be replaced, refills are available
Refills, IPM stainless steel tapes
Made in Germany
| Part #: 464MSa/IPM8 | Part #: 464MSa/IPM7A | Part #: 464MSa/IPM7B |
|---|---|---|
| for gauges 464MS/IPM8 | for gauges 464MS/IPM7A | for gauges 464MS/IPM7B |
| mm / -Front side / - | mm / 1/10" inchFront side / Reverse side | mm / 1/16" inchFront side / Reverse side |
| 10 meters | 10 meters / 33 ft | 10 meters / 33 ft |
| 15 meters | 15 meters / 50 ft | 15 meters / 50 ft |
| 20 meters | 20 meters / 66 ft | 20 meters / 66 ft |
| 25 meters | 25 meters / 82 ft | 25 meters / 82 ft |
| 30 meters | 30 meters / 100 ft | 30 meters / 100 ft |
| 50 meters | 50 meters / 165 ft | 50 meters / 165 ft |